PAR1-PR
The PAR1-PR Bolt is a rockbolt for encapsulation using pumpable bulk resin, for use in quasi-static ground conditions.
Pumpable resin or grout
Tolerates percussion during installation
Single use seals on every bolt
The PAR1-PR Bolt is a rockbolt for encapsulation using pumpable bulk resin, for use in quasi-static ground conditions.
Pumpable resin or grout
Tolerates percussion during installation
Single use seals on every bolt
The PAR1-PR Bolt is a rockbolt for encapsulation with pumpable bulk resin, for use in quasi-static ground conditions. The unique injection seat and nozzle design includes radial seals which allow the use of percussion during installation of the PAR1-PR Bolt without damaging nozzle seals. The radial seals are integrated into the head of the PAR1-PR Bolt negating the need for seal maintenance on the grouting nozzle.
During installation the PAR1-PR Bolt is inserted into a pre-drilled hole and the resin is then pumped through the injection seat on the head of the bolt. The resin flows up the inner annulus of the steel sleeve to the distal end of the hole, to achieve full encapsulation before filling the hole back to the collar. The internal rebar forms a mechanical interlock with the cured resin to anchor the bar in place, resulting in a consistent load-displacement profile defined by the engineered mechanical properties of the bar.
