Explorac RC30 Smart

Reverse circulation drilling rig

Safe

High availability

Scalable

Explorac RC30 Smart

Reverse circulation drilling rig

Safe

High availability

Scalable

Product description

The Explorac RC30 Smart has been designed from the ground up to be a robust and dependable part of an exploration operation. This rig uses the Reverse Circulation (RC) method. RC provides a very rapid, cost-effective way to get high quality, mineral grade samples. These samples form a key part of the planning process in any mining or quarrying operation. Every aspect of the Explorac RC30 Smart has been designed by experts in Reverse Circulation drilling. The rig makes it possible to quickly and safely obtain mineral samples. The Explorac RC30 Smart is available on robust truck carrier which offers great terrainability and gets you right where you need to be with the minimum of fuss.

Technical data

Main application area	Surface exploration
Drilling method	Down-the-hole (Reversed Circulation)
Rod length	6 m 19.68 ft
Drilling depth capacity (see note)	0 - 675 m 0 - 295.27 ft
Max. torque	3199 Nm 2042.31 fitTlbf
Feed type	Cylinder with chain
Feed force (restricted)	75 kN 16860.67 lbf
Pull force	300 kN 67442.67 lbf
Engine	Cat C18 522 kW, Tier 3
Control system	CANBUS RCS4 with control screen plus radio remote control
Carrier option	Truck mounted
Note	Drilling depth capacity figure listed here is at 75 percent capacity load

Transport dimensions

Height	4540 mm 178.74 inch
Length	11780 mm 463.78 inch
Width	2600 mm 102.36 inch
Weight	30000 kg 66138.69 lb
Note	Gross machine mass including full rod rack

Supplementary information

Hole diameter	114 mm (4.5")
Rotation unit spindle thread	114 mm (4.5")
Total length of mast	11 550 mm (454") including jib boom
Truck-mounted pipe rack capacity	15 x 6m (20 ft) pipes (OD 4.5")
Power unit data	CAT C18 Tier III ACERT ATAAC Max torque:2 769 Nm at 1 800 rpm (2 042 lbs) Output: 522 kW (700 hp) at 1 800- 2 100 rpm
Compressor	Atlas Copco XRY 12 two-stage Max pressure: 35 bar (510 psi) Max capacity: 555 l/s at 35 bar (1 250 cfm at 510 psi)
Rod holder max clamping diameter	124 mm (4.88")
Rod handler and control unit	Standard
Splitter	Three tier as standard Fixed cone optional