Universal bracket
for ER 650, ER 1500 X/XL, ER 1700, ER 2000 and ER 2000 X
Longer hose life
Dust suppression
Optional pressure line filter
Optional elimination of case drain line
Universal bracket
for ER 650, ER 1500 X/XL, ER 1700, ER 2000 and ER 2000 X
Longer hose life
Dust suppression
Optional pressure line filter
Optional elimination of case drain line
Universal bracket for ER 650, ER 1500 X/XL, ER 1700, ER 2000 and ER 2000 X drum cutter
ER 1500 with universal bracket
ER 1500 with universal bracket
Universal bracket mounted on the drum cutter
Universal bracket mounted on the drum cutter
Longer hose life through improved hose management
Hoses exit from the rear, directly below the excavator arm, in line with the excavator hydraulic connections so they are not subject to the same mechanical stresses as hoses exiting brackets on the side. Protected by the arm and located in the center of the drum cutter, hoses are less likely to get snagged or suffer abrasive wear by rubbing on the side of the trench. As a result, operating costs are lower through longer hose life and reduced downtime.
Integrated water jets
With integrated water jets, the universal bracket is equipped with a dust suppression system ready to meet current and future demands for healthy working environments in tunneling, demolition, renovation and trenching applications. A connection for the water supply is fitted as standard.
Optional pressure line filter
To prevent premature motor failure due to dirty hydraulic oil, a high-pressure filter can be installed in the pressure line in the Universal Bracket as an optional extra.
Optional elimination of case drain line
The universal bracket can be supplied with the case drain connected to the return line through an additional valve. This eliminates the need for a third hydraulic hose so that the drum cutter can be used with two hoses connected to pressure and return lines in the auxiliary circuit.