Pit Viper 271

The most productive drill available for rotary tricone and down the hole drilling of 171mm to 270mm (6-3/4” to 10-5/8 ”) holes

Single pass performance

Electronic Air Regulation System (EARS) is standard

A single pass drill designed to last

Pit Viper 271

The most productive drill available for rotary tricone and down the hole drilling of 171mm to 270mm (6-3/4” to 10-5/8 ”) holes

Single pass performance

Electronic Air Regulation System (EARS) is standard

A single pass drill designed to last

Pit Viper 271

The most productive drill available for rotary tricone and down the hole drilling of 171mm to 270mm (6-3/4” to 10-5/8 ”) holes

Single pass performance

Electronic Air Regulation System (EARS) is standard

A single pass drill designed to last

Pit Viper 271 rotary blast hole drill

Look to the Pit Viper series of drills if technology, productivity, and high asset life for the lowest total cost of ownership are on your list of priorities. The most productive drill available for rotary tricone and down the hole drilling of 171mm to 270mm (6-3/4” to 10-5/8 ”) holes with up to 18 m (59 ft) clean hole single pass capability.

Tower and carousel

Drill rods

Power unit

Substructure

The PV-271 features a patented cable feed system with automatic tensioning for improved component life and low total cost of operation

Options for both diesel and electric powerplants make the PV-271 a flexible option for any type of operation.

The tower is a “live tower” design meaning it can be raised and lowered with a full carousel and the rotary head at the top of the tower – further testament to the structural design of the tower.

The standard Rig Control System (RCS) provides on-board automation capability as part of the standard drill package to help deliver safety and productivity. With RCS you can run automation with an operator on board with options like auto drill and auto level or you can run with the operator off the drill with the optional BenchREMOTE package allowing one operator to run one or multiple units. With the RCS system on Pit Vipers you can even achieve your ambition of fully autonomous drilling with almost no human interaction with the drill.

The Epiroc patented hydraulic wet clutch removes the load of the compressor during non-drilling functions and decreases fuel consumption and TCO

Extra Capacity

The Pit Viper 271 can now be configured with the XC package (eXtra Capacity) to provide 85,000 lb (42.5 tons) bit load capacity. Along with our proven list of options, the perfect PV-271XC can be configured for your specific application. The PV-270 XC takes the industry-leading Pit Viper 270 series to another level of productivity and reliability, ultimately contributing to the lowest total cost of ownership in the blasthole drilling industry in its class. Epiroc’s PV-270XC series delivers a hole diameter range up to 12 ¼ inches (311mm). This is available in both the multi pass and single pass offering which provides a clean hole of 55 ft (16.8m) and 59 ft (18m). The PV-271XC builds on the high industry standard of performance and innovation of the Pit Viper 270 series.

Pit Viper 271

Pit Viper 271 rotary blast hole drill

Technical Data

Extra Capacity

Downloads

A formidable drill rig fleet

THE DRILL THAT PUT PIT VIPER ON THE MAP

A helping hand with the Pilbara

Related products and services

Pit Viper 275

Automation and information management surface

Parts and services

Repair kits