Epiroc working tools for hydraulic breakers are high-quality, reliable, and o  er optimal durability. They are the right choice to protect your investment in the Epiroc breaker and contribute to a low life cycle cost and increased productivity.
Reliable and robust working tools

Reliable and robust

ClassicLine working tools

ClassicLine is made of a special alloy that has been optimized for hydraulic breaker applications

Tool for every application

Epiroc ClassicLine tools are the standard choice for all kinds of applications, with an excellent ratio of percussive performance to weight.

 

Dimensions, material properties and tip geometry of ClassicLine working tools have a major impact on reliability, wear behavior, performance and productivity. In addition, a wide portfolio of tip shapes allows you to choose the optimal tool for each application.

 

ClassicLine is made of a special alloy that has been optimized for hydraulic breaker applications. An advanced heat treatment process and a strict quality control result in maximum durability of all working tools.

Working tool types

ClassicLine moil point pyramidal working tool

Moil point pyramidal

ClassicLine moil point conical working tool

Moil point conical

ClassicLine flat chisel working tool

Flat chisel

ClassicLine blunt working tool

Blunt tool

ClassicLine wide chisel working tool

Wide chisel

ClassicLine asphalt cutter working tool

Asphalt cutter

Find the right ClassicLine working tool for your hydraulic breaker

What ClassicLine working tools do we have for the SB series?

BreakerTool typeTotal lengthSpecificationsØ
SB 52Moil point (conical)420 mm 40 mm
 Chisel (cross)420 mm  
 Wide chisel (cross)420 mm  
 Wide chisel (parallel)420 mm  
 Asphalt cutter (cross)420 mm  
 Asphalt cutter (parallel)420 mm  
 Shaft Total length 420 mm 
 Tamping pad (square) 200 × 200 mm 
 Post driver pad (circular) Inner diameter 100 mm 
 Pile driver pad (circular) Diameter 50 mm 
 Bushing pad (circular) Diameter 90 mm 
SB 102Moil point (conical)465 mm 45 mm
 Chisel (cross)465 mm  
 Blunt tool465 mm  
 Wide chisel (cross)520 mm  
 Wide chisel (parallel)520 mm  
 Asphalt cutter (cross)480 mm  
 Asphalt cutter (parallel)480 mm  
 Shaft Total length 465 mm 
 Tamping pad (square) 200 × 200 mm 
 Post driver pad (circular) Inner diameter 100 mm 
 Pile driver pad (circular) Diameter 50 mm 
 Bushing pad (circular) Diameter 90 mm 
SB 152 | SBU 160Moil point (conical)540 mm 50 mm
 Chisel (cross)540 mm  
 Blunt tool540 mm  
 Wide chisel (cross)480 mm  
 Wide chisel (parallel)480 mm  
 Asphalt cutter (cross)490 mm  
 Asphalt cutter (parallel)490 mm  
 Shaft Total length 540 mm 
 Tamping pad (square) 200 × 200 mm 
 Post driver pad (circular) Inner diameter 100 mm 
 Pile driver pad (circular) Diameter 50 mm 
 Bushing pad (circular) Diameter 90 mm 
SB 202 | SBU 220Moil point (conical)630 mm 65 mm
 Chisel (cross)630 mm  
 Blunt tool630 mm  
 Wide chisel (cross)650 mm  
 Wide chisel (parallel)650 mm  
 Asphalt cutter (cross)650 mm  
 Asphalt cutter (parallel)650 mm  
 Shaft Total length 630 mm 
 Tamping pad (square) 300 × 300 mm 
 Post driver pad (circular) Inner diameter 150 mm 
 Pile driver pad (circular) Diameter 100 mm 
 Bushing pad (circular) Diameter 130 mm 
tunnel versionMoil point680 mm  
 Chisel (cross)680 mm  
 Blunt tool680 mm  
SB 302 | SBU 340Moil point (conical)760 mm 80 mm
 Chisel (cross)760 mm  
 Blunt tool760 mm  
 Wide chisel (cross)770 mm  
 Wide chisel (parallel)770 mm  
 Asphalt cutter (cross)720 mm  
 Asphalt cutter (parallel)720 mm  
 Shaft Total length 760 mm 
 Tamping pad (square) 300 × 300 mm 
 Post driver pad (circular) Inner diameter 150 mm 
 Pile driver pad (circular) Diameter 100 mm 
 Bushing pad (circular) Diameter 130 mm 
tunnel versionMoil point810 mm  
 Chisel (cross)810 mm  
 Blunt tool810 mm  
SB 452Moil point (conical)840 mm 95 mm
 Chisel (cross)840 mm  
 Blunt tool840 mm  
 Wide chisel (cross)800 mm  
 Wide chisel (parallel)800 mm  
 Asphalt cutter (cross)850 mm  
 Asphalt cutter (parallel)850 mm  
 Shaft Total length 840 mm 
 Tamping pad (square) 400 × 400 mm 
 Post driver pad (circular) Inner diameter 200 mm 
 Pile driver pad (circular) Diameter 150 mm 
 Bushing pad (circular) Diameter 190 mm 
tunnel versionMoil point890 mm  
 Chisel (cross)890 mm  
 Blunt tool890 mm  
SB 552Moil point (conical)920 mm 100 mm
 Chisel (cross)920 mm  
 Blunt tool920 mm  
 Wide chisel (cross)800 mm  
 Wide chisel (parallel)800 mm  
 Asphalt cutter (cross)850 mm  
 Asphalt cutter (parallel)850 mm  
 Shaft Total length 920 mm 
 Tamping pad (square) 400 × 400 mm 
 Post driver pad (circular) Inner diameter 200 mm 
 Pile driver pad (circular) Diameter 150 mm 
 Bushing pad (circular) Diameter 190 mm 
tunnel versionMoil point970 mm  
 Chisel (cross)970 mm  
 Blunt tool970 mm  
SB 702Moil point (conical)950 mm 105 mm
 Chisel (cross)950 mm  
 Blunt tool950 mm  
 Wide chisel (cross)850 mm  
 Wide chisel (parallel)850 mm  
 Shaft Total length 950 mm 
 Tamping pad (square) 400 × 400 mm 
 Post driver pad (circular) Inner diameter 200 mm 
 Pile driver pad (circular) Diameter 150 mm 
 Bushing pad (circular) Diameter 190 mm 
SB 1102Moil point (pyramidal)1,080 mm 120 mm
 Chisel (cross)1,080 mm  
 Chisel (parallel)1,080 mm  
 Blunt tool1,080 mm  

What ClassicLine working tools do we have for the MB series?

BreakerTool typeTotal lengthØ
MB 750Moil point (conical)920 mm100 mm
 Chisel (cross)920 mm 
 Chisel (parallel)920 mm 
 Blunt tool920 mm 
MB 1000Moil point (conical)1,040 mm110 mm
 Chisel (cross)1,040 mm 
 Chisel (parallel)1,040 mm 
 Blunt tool1,040 mm 
MB 1200Moil point (pyramidal)1,080 mm120 mm
 Chisel (cross)1,080 mm 
 Chisel (parallel)1,080 mm 
 Blunt tool1,080 mm 
MB 1500Moil point (pyramidal)1,125 mm135 mm
 Chisel (cross)1,125 mm 
 Chisel (parallel)1,125 mm 
 Blunt tool1,125 mm 
MB 1650Moil point (pyramidal)1,150 mm140 mm
 Chisel (cross)1,150 mm 
 Chisel (parallel)1,150 mm 
 Blunt tool1,150 mm 

What ClassicLine working tools do we have for the HB series?

BreakerTool typeTotal lengthØ
HB 2000Moil point (pyramidal)1,200 mm145 mm
 Chisel (cross)1,200 mm 
 Chisel (parallel)1,200 mm 
 Blunt tool1,200 mm 
HB 2500Moil point (pyramidal)1,310 mm155 mm
 Chisel (cross)1,310 mm 
 Chisel (parallel)1,310 mm 
 Blunt tool1,310 mm 
HB 3100Moil point (pyramidal)1,380 mm165 mm
 Chisel (cross)1,380 mm 
 Chisel (parallel)1,380 mm 
 Blunt tool1,380 mm 
HB 3600Moil point (pyramidal)1,430 mm170 mm
 Chisel (cross)1,430 mm 
 Chisel (parallel)1,430 mm 
 Blunt tool1,430 mm 
HB 4100Moil point (pyramidal)1,530 mm180 mm
 Chisel (cross)1,530 mm 
 Chisel (parallel)1,530 mm 
 Blunt tool1,530 mm 
HB 4700Moil point (pyramidal)1,580 mm190 mm
 Chisel (cross)1,580 mm 
 Chisel (parallel)1,580 mm 
 Blunt tool1,580 mm 
HB 5800Moil point (pyramidal)1,650 mm200 mm
 Chisel (cross)1,650 mm 
 Chisel (parallel)1,650 mm 
 Blunt tool1,650 mm 
HB 7000Moil point (pyramidal)1,700 mm210 mm
 Chisel (cross)1,700 mm 
 Chisel (parallel)1,700 mm 
 Blunt tool1,700 mm 
HB 10000Moil point (pyramidal)1,820 mm240 mm
 Chisel (cross)1,820 mm 
 Chisel (parallel)1,820 mm 
 Blunt tool1,820 mm 

What ClassicLine working tools do we have for the EC series?

BreakerTool typeTotal lengthØ
EC 40 TMoil point (conical)415 mm42 mm
 Chisel (cross)415 mm 
 Blunt tool415 mm 
 Asphalt cutter (cross)450 mm 
EC 50 TMoil point (conical)490 mm52 mm
 Chisel (cross)490 mm 
 Blunt tool490 mm 
 Asphalt cutter (cross)500 mm 
EC 60 TMoil point (conical)560 mm62 mm
 Chisel (cross)560 mm 
 Blunt tool560 mm 
 Asphalt cutter (cross)650 mm 
EC 70 TMoil point (conical)650 mm70 mm
 Chisel (cross)650 mm 
 Blunt tool650 mm 
 Asphalt cutter (cross)720 mm 
EC 80 TMoil point (conical)760 mm80 mm
 Chisel (cross)760 mm 
 Blunt tool760 mm 
EC 80 THDMoil point (conical)760 mm80 mm
 Chisel (cross)760 mm 
 Blunt tool760 mm 
EC 90 TMoil point (conical)835 mm90 mm
 Chisel (cross)835 mm 
 Blunt tool835 mm 
EC 100 TMoil point (conical)920 mm100 mm
 Chisel (cross)920 mm 
 Blunt tool920 mm 
EC 120 TMoil point (pyramidal)1,080 mm120 mm
 Chisel (cross)1,080 mm 
 Blunt tool1,080 mm 
EC 135 TMoil point (pyramidal)1,125 mm135 mm
 Chisel (cross)1,125 mm 
 Blunt tool1,125 mm 
EC 140 TMoil point (pyramidal)1,150 mm140 mm
 Chisel (cross)1,150 mm 
 Chisel (parallel)1,150 mm 
 Blunt tool1,150 mm 
EC 150 TMoil point (pyramidal)1,270 mm150 mm
 Chisel (cross)1,270 mm 
 Chisel (parallel)1,270 mm 
 Blunt tool1,270 mm 
EC 155 TMoil point (pyramidal)1,310 mm155 mm
 Chisel (cross)1,310 mm 
 Chisel (parallel)1,310 mm 
 Blunt tool1,310 mm 
EC 165 TMoil point (pyramidal)1,380 mm165 mm
 Chisel (cross)1,380 mm 
 Chisel (parallel)1,380 mm 
 Blunt tool1,380 mm 
EC 180 TMoil point (pyramidal)1,530 mm180 mm
 Chisel (cross)1,530 mm 
 Chisel (parallel)1,530 mm 
 Blunt tool1,530 mm 

What ClassicLine working tools do we have for the ES series?

BreakerTool typeTotal lengthØ
ES 60Moil point (conical)560 mm62 mm
 Chisel (cross)560 mm 
 Blunt tool560 mm 
 Asphalt cutter (cross)650 mm 
ES 70Moil point (conical)650 mm70 mm
 Chisel (cross)650 mm 
 Blunt tool650 mm 
 Asphalt cutter (cross)720 mm 
ES 80Moil point (conical)760 mm80 mm
 Chisel (cross)760 mm 
 Blunt tool760 mm 
 Asphalt cutter (cross)750 mm