Minetruck MT54 S in underground mine

What powertrain to select when adding new mining trucks to an underground operation?

A powertrain is, in simple terms, the system within a vehicle that generates and delivers power to make it move. This article uses the terms powertrain and power source interchangeably, as power source is more commonly used in everyday mining language.

 

How does a powertrain work?

A powertrain typically consists of three main elements: the engine or electric motor, the energy source (such as a fuel tank or battery pack), and the drivetrain. While conventional powertrains rely on multiple mechanical components to transfer power, electric powertrains typically have simpler drivetrains with fewer moving parts and lower mechanical complexity.

Epiroc - Powertrain Minetruck

Selecting the best powertrain for a mine truck depends on the specific use case, operating conditions, planning horizon, and sustainability ambitions. There is no single optimal solution for all mines.

 

  • Diesel-powered trucks (diesel-mechanical or diesel-electric) remain the most suitable choice for operations with a short planning horizon due to their low upfront cost, proven technology, and relatively simple infrastructure requirements.
  • Diesel-electric trucks offer lower fuel consumption, better performance, and reduced maintenance requirements than diesel-mechanical trucks, often resulting in a lower total cost of ownership (TCO).
  • For mines with a longer planning horizon, electrified alternatives become more attractive. Battery-electric trucks eliminate tailpipe emissions and significantly reduce heat generation, improving the working environment and potentially lowering ventilation costs. However, they require substantial upfront investment, charging or battery-swapping infrastructure, and more careful operational planning.
  • Trolley-assisted trucks often deliver the lowest TCO on high-production haul ramps over long mine lives. Despite their high initial infrastructure costs, they can enable continuous operation with low running costs.
  • Hybrid solutions (diesel-battery) can reduce fuel consumption and emissions, but their effectiveness is highly dependent on the duty cycle and battery size. Fuel cells are neither technically mature nor economically or operationally viable for underground mining in the foreseeable future.
  • Ventilation costs, mine depth, temperature, energy prices, CO₂ reduction targets, and mine life are often decisive factors. In many cases, the reduced ventilation requirements associated with electrification can outweigh the higher vehicle and infrastructure costs.

Which power source is best for a mine truck?

There is no simple answer.

The correct answer is: "It depends on the use case and operating conditions."

 

This article takes an in-depth look at the different power sources available for mining trucks and provides guiding principles for determining which solutions are best suited to different mining applications.

 

Power sources overview

Diesel-mechanical

A diesel-mechanical power source is the traditional powertrain used in mining trucks. It consists of a diesel engine, a mechanical transmission, and a gearbox.

Diesel-electric

A diesel-electric power source uses a diesel engine connected to a generator that produces electricity to power one or more electric motors that propel the truck.

Note: This configuration is not considered a hybrid system.

Battery

A battery-electric power source provides all the energy required to operate the truck. Electricity from the battery powers one or more electric motors that propel the vehicle.

The battery can either be charged while installed in the truck (onboard charging) or removed and charged separately (off-board charging).

Hybrid (diesel-battery)

A hybrid vehicle combines two or more types of power sources. The most common configuration for large vehicles combines a diesel engine with a battery, although other hybrid configurations also exist.

In a diesel-battery hybrid, the battery supports the diesel engine during acceleration and uphill operation. The battery is recharged during braking and downhill operation through energy recuperation.

Plug-in hybrid

A plug-in hybrid is a diesel-battery hybrid in which the battery can also be charged from an external power source.

Trolley

A trolley system provides electric power through infrastructure installed above the haulage drift, such as catenary wires or a conductor rail. The mining truck connects to this infrastructure via a current collector.

Electricity is supplied to an electric drivetrain, where the electric motors propel the truck.

Earlier trolley trucks typically used a diesel generator to power the electric drivetrain when disconnected from the trolley system. Modern trolley trucks generally use a battery instead.

Since the truck has two power sources, it is technically a hybrid. However, in this article, the term hybrid refers only to diesel-battery hybrids.

Fuel cells

A fuel cell generates electricity from hydrogen and oxygen. Hydrogen is stored as fuel in high-pressure tanks, while oxygen is drawn from the surrounding air. The only by-products are water and heat.

A fuel-cell-powered vehicle also includes a smaller battery to manage power peaks and improve system performance, making it another type of hybrid vehicle.

Advantages and drawbacks of the power sources

Diesel-mechanic

A diesel engine is a complex component, especially when equipped with a modern exhaust-treatment system. A great deal of effort has been invested in refining diesel technology for more than a century, making it a very well-proven solution. It requires significant maintenance due to combustion and the number of moving parts.
Advantages

Well-proven technology; all mechanics are familiar with it.

Low machine cost (CAPEX).

Long operating time on a fuel tank.

Fast refueling.

Simple infrastructure compared to the alternatives below.

Drawbacks

Diesel exhaust and heat emissions. This is a challenge for the working environment and a major driver of ventilation requirements in underground mines. It results in high installation and operating costs.

CO₂ emissions.

High diesel cost (OPEX).

The diesel engine and mechanical transmission require significant regular maintenance.

These components have a limited lifetime and need to be replaced during the truck's service life.

It is often possible to run diesel engines on more environmentally friendly fuels, such as HVO100. This can reduce global CO₂ emissions but comes with a higher fuel cost.

 

Another alternative is hydrogen combustion engines, which are modified diesel engines. They produce fewer emissions but come with much higher fuel costs and additional risks discussed in the Fuel Cells section below. This is generally not considered a suitable solution for underground mining vehicles.

 

Here you can find an overview of all available Epiroc diesel-mechanical mining trucks.

Minetruck MT65 S with Deep Automation

Diesel-electric

A truck with a diesel-electric drivetrain is similar in many respects to a diesel-mechanical truck. It is fueled by diesel and produces emissions and heat.

 

Check out Epiroc's diesel-electric mining truck here.

Advantages compared to diesel-mechanic

Less maintenance due to fewer moving parts.

Lower fuel consumption, as the engine runs at an optimal RPM at all times.

Lower transmission losses.

Reduced exhaust emissions, CO₂ emissions, and heat due to lower fuel consumption.

Better performance is often possible.

Lower operating costs often result in a lower TCO despite the higher truck cost.

Drawbacks compared to diesel-mechanic

The electrical drivetrain is more expensive than the mechanical one.

Although it requires less maintenance, it needs electricians for some task similar to the drill rigs.

Minetruck MT66 S eDrive in lab environment

Battery-electric

This is the most common option for achieving a zero-tailpipe-emission mining truck.

 

Here you can discover all available Epiroc battery-electric mining trucks.

Advantages compared to diesel-powered trucks

No tailpipe emissions and lower heat output. This results in a better working environment and the possibility of reduced ventilation requirements.

CO₂ emissions can be much lower, depending on the source of electricity.

Battery-powered trucks often have higher installed power than diesel-powered trucks, resulting in higher speeds on grade and increased productivity.

Drawbacks compared to diesel-powered trucks

Batteries are expensive, leading to higher purchase costs (CAPEX). Solutions such as Epiroc Battery as a Service (BaaS) can reduce upfront costs but increase operating expenses (OPEX).

Batteries require significantly more volume and weight than an equivalent diesel engine with fuel tank, resulting in a heavier truck, reduced payload capacity, or shorter operating time.

Charging takes time and can reduce productivity.

Battery swapping can avoid charging downtime but requires additional batteries, space, and equipment.

Charging infrastructure is more expensive than diesel refueling infrastructure.

Underground operations must balance the cost of installing many chargers near production areas against the cost of trucks traveling longer distances to reach charging stations.

Higher charging power reduces charging time, but both chargers and supporting infrastructure become more expensive.

Minetruck MT42 SG making a turn in an underground mine.
Operator driving a Minetruck MT42 SG with a focus on the RCS screen.

Hybrid

The simplest way to build a diesel-battery hybrid mine truck is to add a battery to a diesel-electric drivetrain. The main purpose of the battery is to store braking energy through regenerative braking and use it to support the diesel engine. On long declines, substantial amounts of energy can be recovered.
Advantages compared to diesel-electric

Lower fuel consumption.

Reduced exhaust emissions, heat, and CO₂ emissions.

Potential for increased ramp speed.

Drawbacks compared to diesel-electric

Higher complexity and CAPEX because both a diesel engine and battery are required.

Payload capacity may need to be reduced depending on battery size.

For a large mine truck, storing regenerative energy from a long decline requires a large battery weighing several tonnes. Since the diesel engine remains a similar size, payload capacity must often be reduced. Smaller batteries preserve payload but can only store energy from shorter declines. As a result, the optimal hybrid configuration depends on the use case. There is no one-size-fits-all solution.

Plug-in hybrid

Plug-in hybrids are common in passenger cars, which are often driven short distances and then parked long enough for charging. Mine trucks operate differently and typically need to run continuously throughout a shift.

 

Since there is often no opportunity to charge a mine truck during operation, the value of a plug-in hybrid is limited.

Trolley (battery-trolley)

A trolley truck is powered by the trolley system for most of its operation while driving. At the same time, the battery can be charged if needed. When disconnected from the catenary wires, the truck operates on battery power.

 

At Epiroc, we currently offer one trolley-truck alternative: Minetruck MT42 SG Trolley.

Advantages compared to diesel- or battery-powered trucks

No emissions, like a battery-powered truck.

Has a smaller battery that is used in a way that results in a longer lifetime. The battery cost over the lifetime is much less.

Often faster on ramps than battery- or diesel-powered trucks, resulting in shorter cycle times.

No need to stop for charging or refueling. Combined with autonomous operation, this can enable near-continuous operation.

Drawbacks compared to diesel- or battery-powered trucks

Requires significant electrical infrastructure, including wires, rails, and substations.

Operational flexibility is reduced because trucks must spend most of their time connected to trolley lines.

Extending trolley lines as ramps grow longer can be time-consuming and may

Epiroc - Minetruck MT42 SG Trolley
Epiroc - Minetruck MT42 SG Trolley

Trolley (diesel-trolley)

There are no advantages to diesel-trolley systems compared to battery-trolley systems with modern batteries. Diesel-trolley trucks emit exhaust gases and are significantly slower than battery-trolley trucks when not connected to the trolley system.

Fuel cells

Fuel cells are another way to design a zero-tailpipe-emission truck. The by-products are water and heat.
Advantages compared to diesel- or battery-powered trucks

No hazardous emissions.

Potentially longer operating time than battery-electric solutions.

Drawbacks compared to diesel- or battery-powered trucks

Immature technology. There are currently no serial-production components capable of providing a suitable lifetime in underground mining environments.

Very high equipment costs.

High hydrogen fuel costs.

High CAPEX and OPEX lead to a very high TCO.

Lack of hydrogen infrastructure.

High-pressure tanks pose a safety concern in confined spaces.

Fire and explosion risks associated with hydrogen leaks remain a significant concern.

Research into alternative hydrogen storage methods is ongoing, but these technologies are still in early stages and have their own disadvantages.

 

At present, fuel cells are not considered a suitable solution for underground mining vehicles due to technical, economic, and safety challenges.

Which powertrain to select?

Choosing the right powertrain for your next mining truck requires balancing several factors. Is the planning horizon short or long term? What ventilation requirements does the mine have? Are there environmental targets or site-specific constraints that need to be considered? The answers to these questions can help identify the most suitable powertrain for your underground operation.

 

Let's explore these considerations to help make your next mining truck selection more informed.

Short planning horizon

When a fast return on investment is required due to a short remaining mine life or short-term contractor agreements, diesel-powered trucks are generally the natural choice. Whether diesel-mechanical or diesel-electric is the better option depends on many variables affecting TCO; however, diesel-electric is often the more efficient alternative.

 

A prerequisite for diesel power is that the ventilation system can handle exhaust gases and heat from the engines.

Long planning horizon

If the planning horizon is equal to or longer than the expected lifetime of the trucks, alternative power sources should be considered.

 

If diesel power is required, diesel-electric is often the preferred option. The higher truck cost can be offset by improved productivity and reduced fuel consumption.

 

Battery-powered trucks have higher CAPEX or OPEX (depending on how the battery is financed). They also require charging installations. However, savings from reduced ventilation requirements, sometimes including ventilation-air cooling, and improved air quality can justify the higher direct costs. Environmental targets and CO₂ taxes may further strengthen the business case.

 

For operations with a long planning horizon and high production volumes on the same ramp, trolley trucks often provide the lowest TCO. The initial investment is high, but operating costs are substantially lower than diesel or battery-only alternatives.

Ventilation challenges

Ventilation is a major cost and operational challenge in underground mining. Diesel engine emissions are one of the primary drivers of ventilation demand. In some underground mines, high ambient temperatures also require cooling, which consumes significant amounts of energy.

 

The cost savings associated with reduced ventilation requirements, including fewer fans, shafts, ventilation ducts, energy consumption, and cooling, can sometimes exceed the additional investment required for battery-powered or trolley-powered trucks.

 

However, switching from diesel to electric does not always generate ventilation savings. Ventilation is also required to remove blast gases, which can be the dominant ventilation driver. In these cases, savings may come only from reduced power consumption, although these savings can still be substantial.

 

The best opportunities for ventilation-related savings from electric mining trucks include:

 

  • Greenfield projects: New mines or major extensions where ventilation can be designed around electric equipment from the start.
  • Mine expansions: Situations where the existing ventilation infrastructure has reached its practical limit and where further expansion would otherwise require major investment.

Both diesel-electric and diesel-battery hybrids reduce ventilation requirements slightly compared to diesel-mechanical trucks due to lower exhaust emissions, but the reduction is typically not substantial.

 

Fuel cells do not produce hazardous emissions, but they do generate heat. They also have challenges operating in high ambient temperatures, making them less suitable where ventilation is primarily needed for cooling.

High sustainability ambitions

Strong sustainability ambitions can be a major driver for electric trucks and other electric equipment. The challenge is often balancing ambitious CO₂ targets with economic realities when selecting a specific truck technology.

 

Diesel-electric trucks and diesel-battery hybrids can serve as stepping stones toward reduced emissions. While they may not meet long-term 2040 or 2050 targets on their own, they can contribute significantly to achieving nearer-term goals, such as 2030 targets.

Международные Дизельные самосвалы Minetruck Electric mine trucks