September 24, 2020
The nature in Kirovsk, a small town above the Arctic Circle, brings to mind scenes from the Game of Thrones fantasy drama series. Mountain peaks surround the city, although they are hidden during snowstorms, and a sharp wind forces residents and visitors to seek shelter.
Choosing a most unusual place for shelter, we head for the underground workings of Kirovsk mine. A 4×4 truck drives for fifteen minutes through illuminated tunnels before finally stopping in front of a large machine.
Almost one hundred years ago, one of the largest and richest deposits of apatite-nepheline ores was found in the Khibiny mountains. The phosphorus-containing raw materials mined from these mountain are inputs in the production of fertilizers, which in turn are used not only in Russia but in more than one hundred countries around the world.
"In the past, we drilled without remote control using different machines. The quality was good, but we wanted to achieve maximum safety for rig operators working underground"
Chief Engineer at the Kirovsk Branch Vyacheslav Onuprienko elaborates:
“We are working on box holes,” he says. When he came in 2014, the mine used manual drilling machines not only to drill vertical boreholes but also in part for deep drilling. Not long thereafter, management decided to switch to mechanized rigs.
“The first Epiroc Simba rig was tested in 2014. It was more modern than similar machines from other manufacturers, with glazed cabs, a high level of comfort for remote work, and higher productivity,” Yarunin says. Initially, the rig was used in semi-automatic mode. The operator set the drilling settings for the well in manual mode and then let the rig do the work.
Apatit JSC Kirovsk Branch then implemented Epiroc’s smart function, which does not require the constant presence of the rig operator. Drilling is automated through the ABC Total function, with teleremote capabilities enabled by the Simba Automation package. A digital drill plan is installed on every rig and can be uploaded remotely through the Rig Remote Access option. This has enabled Apatit JSC to move its rig operators from under the ground to the surface.
“Look here, everything is visible in the diagram,” says Yevgeny Torsogoyev, deputy head of the drilling site, while laying out a special drilling map. He explains that the only people who periodically work underground with the machines are the special workers driving the Simba rigs from one blast-hole ring (which is the markup for drilling and putting explosives into wells) to another. “If someone wants to approach the drilling module, they trigger motion sensors and the rig stops. Plus, there are video cameras so we all can watch remotely.”
Two people are working in a warm operator’s room. In front of them are joysticks for remotely controlling the Simba rigs, and several screens show what is happening with the machines underground. Each operator controls four to six rigs. One of the operators is Igor Kramarenko, who’s been with Apatit JSC Kirovsk Branch since 2003. “I worked on all the drilling rigs we had in production,” he says, explaining that the work behind the control panel underground could be physically demanding. “I was not afraid, but it was dusty and noisy. Sometimes the equipment would break down and it was impossible to change parts underground, so workers had to take the rigs to the surface for repairs.”