Australian quarry increases productivity with SmartROC T45

November 20, 2014

For concrete and quarry company Local Mix, increasing productivity was simply a matter of finding the right drill rig. By all accounts, they’ve found it.

The Anakie hard rock quarry outside the city of Geelong, on the south coast of Australia, supplies 500 000 tonnes of crushed rock and road base material to the construction industry every year. Here, concrete and quarry company Local Mix, which took over the business in 1993, has been doing all of the drilling and blasting work by itself, rather than use contractors.

"My first impression was that it was more advanced than the others on display, so we went away, did our research and found that it outclassed its competitors in terms of technology, fuel savings, automation, precision and agility."

Steven Richardson ,General Manager, Local Mix

But when the company realized that the second-hand drill rig it had been using did not have the capacity to meet its aim to increase productivity, General Manager Steven Richardson set off to search for the best rig he could find on the market.

Watpac is inspecting the holes of SmartROC T45

“We visited the Bauma show in Germany in 2013 and it was there that we first saw the Atlas Copco SmartROC T45,” he recalls. “My first impression was that it was more advanced than the others on display, so we went away, did our research and found that it outclassed its competitors in terms of technology, fuel savings, automation, precision and agility.

On returning to Australia, Richardson and his Quarry Manager, Mat Teesdale, visited Mt Magnet in Western Australia, together with Atlas Copco representatives, to see the SmartROC T45-10 (fixed boom version) in action. They were impressed and decided that the flexible boom version would provide the versatility required for the ground conditions at their quarry. After just eight months on the site, the SmartROC T45 had increased drilling efficiencies and reduced operating costs.

Substantial fuel saving

The SmartROC T45 is consuming an average of 13.77 liters of fuel per hour, confirms Teesdale. “That’s impressive enough, but even more so when you compare it to our old rig which was running at about 15.37 liters per hour, increases of 4 bar and 115 liters per second, plus an extra 9 kW for the rock drill,” he explains. “The fuel consumption we’re getting is partly due to the rock we’re drilling. It is not excessively hard, but it’s variable, which can cause wear and tear on consumables when drill force is not matched to ground requirements.” “Another reason why we bought this rig is that it gives the operator exceptional control over the flushing air, so the machine produces only what is required. As a result, we’ve been able to greatly extend the life of the drill rods – in fact, the original rods are still on the machine and after 8 500 meters they showed little sign of wear.”

SmartROC T45 in Australia. Customer Local Mix.

Automatic processes

The SmartROC T45 can be equipped with the hole navigation system (HNS), which makes accurate setup and collaring extremely easy. Many aspects of the operative process, such as aligning the feed and the actual drilling, are automatic, which not only gives continuous, satisfactory results but also exceptional precision. The system is loaded with the drill pattern which allows tramming to the optimal position from which to drill multiple holes at the required depth and angle. And the whole process is driven and documented by the rig’s ROC Manager program which provides detailed information for accurate decision making. Bore tracking of blasts has seen accuracy between 85-100% This rig has a 3G modem installed rather than the usual base station system to access the GPS coordinates. This provides the flexibility to move to different sites while retaining all the features of HNS. Moreover, it has eliminated the inefficiencies and inaccuracies associated with manual measuring and markout of holes. Hole collaring is automatic and precise, as is the alignment of the holes at angles and depths that will deliver superior blast fragmentation. Markouts are being completed in 25% of the time and blast fragmentation is unprecedented. Drillmeters per engine hour have increased 23.7% due to the improved set up time, greater flushing air capacity and rock drill penetration. Read the full story at Mining and Construction online.

Epiroc operated under the trademark “Atlas Copco” prior to January 1, 2018.

SmartROC T45 2014 Quarrying International Surface drill rigs Surface and Exploration Drilling division Customer story

Related products

SmartROC T45 freecut

SmartROC T45

Surface drill rig for mining and quarrying

All surface drill rigs

A first in Ghana

April 5, 2022

SmartROC T45 2021 Quarrying Mining International Surface Ghana Surface and Exploration Drilling division Customer story

Mining contractor Kinkubi of Ghana has become the first in the country to acquire Epiroc’s SmartROC T45LF drill rig, bringing “smart” technology to the nation’s all-important gold mining industry.

Continue reading

Silent running

March 10, 2022

SmartROC T45 2022 Quarrying Mining International Surface Surface and Exploration Drilling division Customer story

Blast drilling only meters from civilian towns is now easier, thanks to a unique Epiroc solution developed for Roc-Drill, a long-standing Australian customer.

Continue reading

The town that shaped a mine

February 9, 2022

Australia SmartROC T45 2022 Quarrying Mining Surface Surface and Exploration Drilling division SmartROC T40 Customer story

Ravenswood has been digging gold out of the ground for over 150 years. But this tiny Australian town is now the inspiration for a very modern, community-minded style of mining – and an innovative new Epiroc blast drill.

Continue reading

Visit our newsroom