Raiseboring tools

Our raiseboring drill pipes are designed and manufactured for fatigue resistance with the use of a radiused root thread instead of the industry standard flat bottom root thread design. In addition, the use of shot peening in critical areas, also improves the fatigue life of the pipe and other components. The combination of the radiused root thread and the shot peening of critical areas, is a step above the industry standard.

Epiroc provides a comprehensive range of raiseboring cutters to fit any need. From kerfed cutters to random cutters and specialty cutters – the solution is yours to choose.

Magnum and Magnum V cutters are the workhorses of the product offering. The Magnum cutter is designed to fit into the square pocket saddle and the Magnum V is designed to fit into the V pocket saddle to better accommodate existing reamers, although the cutters are identical between the saddle pockets. With the largest bearing capacity in the industry and the most amount of carbide cutting the rock, these cutters have a wide range of applications. The RCC cutters have a more tapered cutter shell making them roll true on smaller diameters and to be more aggressive on larger reamers in brittle ground. Designed to fit into the RCC style saddle.

Lower cost per meter drilled.
Our industry leadership is the direct result of unwavering dedication to lowering your overall drilling cost. As part of this effort, our pilot bits not only give you outstanding service life, the range of cutting structures covers a wide range of rock formations to be drilled.

At your service – wherever you are.
No matter how great our products are they’re only a start. To secure your investment, we provide technical support. Thanks to Epiroc Secoroc’s global presence, qualified support is never more than a phone call away. We have skilled personnel on hand across the world to offer assistance, advice, training, service and maintenance – whenever and wherever you need it.

A wide range of sizes.
Our raisebore reaming systems covers a wide range of sizes from the integral 70 centimeter to 8 meter diameter modular designs.

Custom designed.
Our products are designed in consultation and feedback from customers to provide designs that are ridged, versatile and easy to service.

Reliability and flexibility.
Matching our reamer designs with the best cutters in the industry make Secoroc the perfect blends of reliability, flexibiliy and serviceability, but the best is yet to come.

Boxhole reamers

Our robust and well-designed boxhole reamers are popular among raise drillers around the world. The boxhole boring application tend to be more site and machine specific than other raiseboring applications due to the reamer being pushed upwards from the machine. Safe handling of equipment and muck in this application is key to success. Our boxhole reamers are designed for with the keys to success in mind for boxhole applications.

Down reamers

Typical down reaming sizes are up to 1,2 m in diameter. This is the largest size to pass through the work table of most raisedrills equipped to down ream. In the down reaming method the pilot hole is completed followed by a subsequent reaming cycle. All from the upper level, and the cuttings passes through the pilot hole to the lower level. Our range of down reamers are designed to ease the evacuation of cuttings even at lower angles as this is key for effectiveness of the boring process.

Conventional reamers

Conventional raiseboring is making up the majority of the raised shafts done worldwide. Our range of reamers cover everything from the lowest running cost integral, low profile reamers to complex modular reaming systems where design focus has been on serviceability and user-friendliness. So whether you are facing dimensional limitations, weight restrictions or have application specific needs. Chances are that we already have the right equipment designed.

Hole openers

The need for enlarging raise drilled pilot holes is mostly common in mining applications where you would want to install utility lines or pumping paste in cut and fill operations. Our range of hole openers end at 0,7 m. For larger dimensions the standard type of reamers with cutters take over. The hole openers are typically equipped with bit thirds. A bit third is literally a third of a pilot bit, machined in such a way that it can be bolted or welded onto the hole opener body.

Stems

As a connector between the reamer and drillstring, the stem has the most grueling task in the raiseboring system. Transferring machine thrust and torque to the cutting face of the reamer. While at the same time handling bending forces fed back from the same. Choices of material, surface treatments and flex zones to mitigate risks are all designed into our stems.

An unbeatable combination in raiseboring equipment

We have an unbeatable technique when it comes to mechanical raise excavation – making large holes from 70 centimeter up to 8 meter in diameter. Flexible reamers, rigid saddles and durable stingers all add up to increased productivity.