September 22, 2020
CAUSA, Epiroc’s number 1 customer in the world for raiseboring consumables and accessories (RBM), uses the Robbins 73 rig, fitted with Epiroc’s Magnum cutters, for raiseboring in the most important mining operations in Mexico. Founded in 1978, this mining contractor for raiseboring and exploration drilling “is currently operating 20 Robbins raiseboring machines owned by the company and managing 10 more for various mining companies,” says CAUSA’s founder, Gabriel Elizondo.
When asked what he believes are the advantages of using Robbins equipment, Gabriel Elizondo replies, “with the use of raiseboring machines, the human risk has practically been eliminated,” and he adds that “Robbins equipment has revolutionized mining when it comes to vertical and slope works.”
While the relationship between CAUSA and Atlas Copco – now Epiroc – officially started when the former was founded in 1978, CAUSA’s relationship with Robbins machines goes back to the beginning of the 1960s, through its parent company – NEMISA. That’s when NEMISA acquired its first Robbins rig: the Robbins 32R with hydraulic motor.
This was even before Atlas Copco purchased The Robbins Company in 1993.
With its current fleet of Robbins 73R rigs – Epiroc’s most popular model on account of its sturdy yet compact design – CAUSA carries out raiseboring and exploration drilling at several mining sites in Mexico, including the Fresnillo and Madero mines on the outskirts of the city of Zacatecas. It is here, at the Fresnillo mine, that CAUSA recently broke a record using Epiroc cutters.
Twelve kilometers away from the city of Zacatecas, in an arid region of central Mexico covered in cacti and Joshua trees, the Madero mine extends across an area of one thousand hectares. As a polymetallic mine, it relies on the extraction of multiple metals, but zinc is its main objective.
Here, the Robbins 73R rigs operated by CAUSA are critical in the day-to-day mining activities. According to Daniel Rodríguez, CAUSA’s Operations Manager, “raiseboring generally has four uses, the first and probably most important being ventilation. Through the large diameter hole that is created, fresh air can be pushed down into the mine, or stale air can be taken out.”
The other purposes are to refill holes with rocks left over after mining, security purposes (mainly as emergency exits), and for services. “Electrical cables can be installed through the holes, pipes can be installed to carry diesel fuel down the mine, and pipes can be introduced to take concrete down faster, more easily,” says Daniel Rodríguez.
Nearby, the Fresnillo mine stands out by its sheer size. According to Fidel Morín, Projects Superintendent at the Fresnillo mine, “three shafts and a vertical conveyor belt, as well as three access ramps” spread across an area of 14 square kilometers (approximately 1 400 hectares) are currently being operated. Its main vein alone, named San Carlos, “is seven kilometers in length,” says Morín, and it is “along that vein that we have to put infrastructure to do the mining,” he explains.
When it comes to infrastructure, a recent record-breaking raiseboring operation carried out by CAUSA will solve an efficiency problem. “This project began with the need to lower people through the mine in a more efficient way. Right now, taking a person down 682.6 meters is taking us around 45 minutes,” says Morín. By installing a hoist in the raisebored shaft, workers will be transported vertically, instead of using ramps that already exist within the mine. “[It’s] 45 minutes vs. 10 minutes, so we are saving a little more than half an hour,” he adds. Besides saving time, “It has to do with transit, safety, pollution, vehicle maintenance, and a number of factors that are focused on productivity, which is what we are looking to do with this type of [project],” Morín says.
The Fresnillo mine currently has seven Robbins machines in operation. “We have four standard torque 73R machines, a 73R high torque machine and two 34 RH machines; so the ones we use the most are the 73R high torque and the 73R standard,” says Isidro “Chilo” Rodríguez, Raiseboring Captain at the Fresnillo mine.
But the rigs are not the only reason for the mining operations’ success. The record-breaking raiseboring operation at Fresnillo was made possible thanks to the Epiroc cutters that the raiseboring reamer are fitted with. While drilling a 3,6 dm raise in 2019, the cutters made it intact through all 682.6 meters that it took them to reach the top, and the hole presented zero deviation.