The drill is designed for water well and other applications requiring air or mud rotary and down hole hammer drilling methods. It is suitable for drilling 5 to 12 in (127 to 305 mm) holes but can drill up to 20 in (508 mm) and handle up to 19 in (483 mm) diameter casing. The rig is factory mounted on a Peterbilt 367 truck or an optional International Paystar 5900i.

Truck Engine/PTO Water Well drill - DTH, Rotary air, and mud drilling; Pullback capacity 311.4 kN (70,000 lbs); Pulldown capacity 133.4 kN (30,000 lbs)

- Adaptive CycloneTM Operating System allows you to tackle easy or tough jobs with equal confidence
- Electronic air regulation system continuously monitors compressor volume and pressure output for optimum efficiency
- 70,000 lb pullback (31,751 kg) and 37 ft 6 in (11.4 m) tower support deeper applications

Downloads

  • reference book on deephole drilling

    Deephole Drilling 19.7 MB, PDF
  • TH60 TH60DH water well drills brochure

    TH60_TH60DH Brochure 442.5 kB, PDF
  • TH60DH Cyclone brochure

    TH60DH Cyclone 1.7 MB, PDF