New premium Epsilon² tricone bit boosts drilling productivity

With the new Epsilon² premium tricone drill bit, surface mining and construction professionals will enjoy up to 100 percent longer distance drilled before bit discard.

Epsilon² landscape

Extensive field testing

Thanks to smart patented features, Epsilon2 will greatly improve drilling productivity through extended bit life and a faster rate of penetration (ROP).

 

The new air bearing bit has been tested thoroughly in the field by selected customers in highly diverse operating conditions in North America, South America and Asia. The tests show an average of more than 60 percent longer distance drilled before bit discard compared to the previous Epsilon generation – peaking at over 100 percent in some cases.

"The name Epsilon ‘to-the-power-of-2’ is no coincidence. It’s more than an upgrade, it’s a new generation."

Bahadir Ergener, Product Line Manager - Rotary

Bearing problem solved

“Degrading of the bearings was long a common cause of bit failure, forcing customers to accept a slower ROP and a shorter service life than necessary. Either the bearings would corrode due to moisture from water injection for dust suppression, or overheat by friction,” Bahadir continues.

 

Two patented Epiroc features combine to solve the problem: Tornado, which channels cooling air over the hotter load side of the bearing, and Torrent, which removes moisture from the cooling air and therefore reduces corrosion.

 

Twice the distance drilled per bit

“Epsilon² outperforms other air bearing bits on reliability, and even challenges more costly sealed bearing bits. Users of sealed bits can now turn to Epsilon² for comparable productivity at a lower cost,” explains Steven Brooke, Rotary Global Product Manager at Epiroc.

 

Longer bit life means improved personal safety through reduced operator interaction with the drill bit. With twice the distance drilled, there is no need to replace the bit every day, perhaps only once a week,” he continues.

 

Another aspect of extended bit life is that there will be fewer bits manufactured in total over time, which in turn reduces the outtake of raw material, the transportations and the ecological footprint.

"We believe customers will value a lower climate impact when selecting their next rotary drill bit."

Steven Brooke, Rotary Global Product Manager

For further information please contact:

 

Bahadir Ergener, Product Line Manager (PLM) Rotary

Cell: +46 73 274 53 30, e-mail: bahadir.ergener@epiroc.com

 

Steven Brooke, Rotary Global Product Manager

Cell: +1 214 793 0192, e-mail: steve.brooke@epiroc.com

International Rotary drilling tools 2020 Press release