banner head for ABC option page
The Automatic Bit Changer (ABC) from Epiroc is available as an option for both the SmartROC D65 and SmartROC D60 surface drill rigs using the Epiroc COP M6 hammer. Operators can easily change drill bits completely hands-free at the touch of a button, and select, add, or remove the bits either from a remote control room via CAP, or from the comfort of the cab. This significantly enhances safety by eliminating exposure to live work environments, while also improving drilling productivity.

L’ABC est conçu pour une maintenance facile, offrant aux opérateurs une excellente visibilité et un accès pratique aux points d’entretien de routine.

ABC for SmartROC D65 and D60

Principaux avantages

 

Améliore la sécurité et la productivité : l’opérateur change le taillant sans quitter la cabine. Cela contribue à l’élimination des travaux sous tension (LWE) et augmente la productivité en maximisant le temps de forage.

Réduit la fatigue de l’opérateur : l’ABC minimise le levage manuel, ce qui contribue à réduire la fatigue des opérateurs et des techniciens.

Améliore le fonctionnement à distance : l’ABC permet aux opérateurs travaillant à distance de changer de taillant sans l’aide du personnel sur site.

Loading...

Loading...

Product overview

Taking safety and productivity to the next level
The brand-new ABC is available as an option for SmartROC D65 and D60 surface drill rigs equipped with the COP M6 DTH hammer. Operators can easily change drill bits completely hands-free at the touch of a button, and select, add, or remove the bits either from a remote control room via CAP, or from the comfort of the cab. This significantly enhances safety by eliminating exposure to live work environments, while also improving drilling productivity.

Designed to make everyday work easier
The ABC is designed for easy maintenance, providing operators with excellent visibility and convenient access to routine service points. The bit-loading deck simplifies the reloading of drill bits – some weighing up to 28 kg – by minimizing heavy lifting.
By reducing operator fatigue and enhancing operational consistency, this new option for the SmartROC D65 and D60 will significantly improve operators’ day-to-day work.

Downloads

 

Brief technical information
Main application areaMining and quarrying
Drilling methodDown-The-Hole (DTH)
ProductSmartROC D65/SmartROC D60
Dimensions and weightHeight: 1 218 mm (48")
Length: 1 167 mm (46")
Width: 945 mm (37")
Weight: 257 kg (567 lbs) (inc. hydraulic valves - no bits)
ABC capacity (varies depending on bit size)5 bits — 165 mm (6.5”)
 5 bits — 171 mm (6.74”)
 5 bits — 178 mm (7”)
 4 bits — 203 mm (8”) 
ABC compatible DTH hammersEpiroc COP M6
ABC retro fit kit requirementsSmartROC D65 or D60 MKII with Epiroc COP M6 hammer
ABC can only be combined with Rod Handling System 140 (RHS 140)
Rig must be running RCS software 6.31 or higher
The breakout table and drill steel support must be designed for a 6” or 7” hammer
The total weight of the machine, including locally installed options, must not exceed 30 000 kg
The ABC can be specified as an option on new orders or installed as a retro-fit kit. Please contact your nearest Epiroc representative for further information.
Additional important informationABC cannot be ordered with, or retro-fitted to, rigs with Reverse Circulation (RC).
SmartROC D65 XLF with stage V engine may not be able to have ABC installed or retro-fitted in combination with selected options in order to keep the total weight under 30 000 kg. Extra checks must be made on the rig prior to ABC installation. Please contact Epiroc for the latest information.